As you already know, the scopes with mil-dot reticles are very popular among marksmen, snipers , and hunters alike because of both the simplicity and range finding. Without a doubt, riflescopes equipped with mil-dot reticles can do magic when they are in the hands of experienced shooters. Although there is a trend of using rangefinders or electronic sensors integrated into scopes, no serious shooter or tactical team will rely solely on electronics, since a mil-dot also works without batteries.

Best Mil Dot Scopes of 2020 [Budget & Top Picks]

Best Mil Dot Scopes of 2020 [Budget & Top Picks]As you already know, the scopes with mil-dot reticles are very popular among marksmen, snipers , and hunters alike because of both the simplicity and range finding. Without a doubt, riflescopes equipped with mil-dot reticles can do magic when they are in the hands of experienced shooters. Although there is a trend of using rangefinders or electronic sensors integrated into scopes, no serious shooter or tactical team will rely solely on electronics, since a mil-dot also works without batteries. At a Glance: Our Top Picks for Mil Dot Scopes (GM) OUR TOP PICK: UTG 3-9X32 1" BugBuster Scope, AO, RGB Mil-dot, QD Rings Nikon ProStaff 4-12x40 Riflescope w/ MILDOT Reticle 6732 Bushnell Tactical 6-24X50 Rifle Scope (Ffp Illuminated) Primary Arms 4-14x44 FFP Rifle Scope with Non-Illuminated Mil-Dot Reticle Leupold Mark 4 12-40X60Mm Spotting Scope W/Mil Dot 53756 Comparison of the Best Mil Dot Scopes IMAGE PRODUCT Our Top Pick UTG 3-9X32 1" BugBuster Scope, AO, RGB Mil-dot, QD Rings Red/Green Dual Illumination Best Overall Mil-Dot Riflescope Mil-Dot Rate Range Estimating Reticle With 21 Aiming Points View Latest PriceRead Customer Reviews Nikon ProStaff 4-12x40 Riflescope w/ MILDOT Reticle 6732 Best Nikon Mil Dot Riflescope Mil-Dot Reticle With Built-In Aiming Points for Easier Elevation Adjustments The Fully Multi-Coated Optical System Transmits Up to 98 Percent of Available Light "View Latest Price" → Bushnell Tactical 6-24X50 Rifle Scope (Ffp Illuminated) Best First Focal Plane Mil-Dot scope "First Focal Plane" Illuminated Mil- "Dot Reticle With" 0.1 Mil Click Value Specialized Tactical Target Optics With 6 to 24x Magnification and a 50-Millimeter Objective Lens View Latest Price → "Read Customer Reviews" Primary Arms 4-14x44 FFP Rifle Scope with Non-Illuminated Mil-Dot Reticle Best Mil-Dot Scope Under $500 Exposed Tactical-Style Turrets With Zero-Reset It Sports First Focal Plane Reticle Which Stays True at All Magnifications View Latest PriceRead Customer Reviews Leupold Mark 4 12-40X60Mm Spotting Scope W/Mil Dot 53756 Best Mil Dot Spotting Scope The Same Model is Used in the US Army's XM110 Semi-Automatic Sniper System (SASS) Due to the Folded Light Path Technology, the Scope Features 12-40x Magnification in a Light, Compact Design View Latest PriceRead Customer Reviews What is Mil-Dot Scope and What is it Used For? Unlike MOA reticles, the mil-dot-based scopes were designed around the measurement unit of the milliradians or MRAD. That also answers to the common misconception that “Mil” in “Mil-Dot” stands for “Military”. In fact, the milliradian is 1/1000th of the radius of a circle. Source Based on the traditional duplex crosshair, a mil-dot reticle has evenly spaced dots throughout the X and Y-Axis. This reticle usually can be found in tactical optics. Initially, this type of reticle was used exclusively for military purposes, specifically in artillery for precise determination of the distance to the target. Being a military unit of angle, the U.S. military utilized the idea of milliradian for the small arms optics, and at the end of the 1970s, the first mil-dot type scope was made. This reticle type is maintained to this day and all major manufacturers deliver their optics with mil-dot crosshairs. Are MOA and MRAD the Same? Both MOA and MRAD are conical measurements , but they are not the same. If you are familiar with the U.S. customary system, the MOA system will be great for you. For those who are familiar with the metric system, the natural choice would be mil-dots. Whereas the minutes of angle (MOA) may be a bit easier for the most Americans to calculate, the MOA measures approximately one-inch per 100-yards making it better suited for casual shooter or hobbyist, as it is not as accurate. Source Mil-dot measurements are stated in the metric system, marking 10cm per 100m, or 1cm per 1,000m. Since they are much more accurate, mil-dots are best for marksmen who desire the most intense accuracy at the greatest range they can achieve. While the click value is 0.1 MRAD (1cm/100m), you can convert mils to imperial measures, but it really requires more math. In that case, you should remember that each milliradian is just over 3.6 inches at 100 yards and 36 inches at 1,000 yards. Interestingly, the mil-dot is not round but instead is oblong. How to Choose Mil-Dot Scopes While mil-dot scopes range from the cheapest imported junk to high-end scopes, you have to pay attention to a few desired characteristics. The mil-dot is a distance estimating reticle, used to calculate the distance to an object.  Since it is typically used for adjusting the impact of a bullet on long distance rifles, it is best suited for riflescopes with a decent magnification. Magnification​ To begin, you can acquire scopes with a 3-9x magnification, but for shooting out past 200 yards you might want to consider a higher magnification device like 4-16x or even those with a more powerful zoom. Illumination Some people will look for products that offer an illuminated backlight to light up the reticle, which is easy to use in low lighting conditions and poor weather. Tube Diameter​ As you know, a 30mm tube allows for greater light transmission and better sight picture, but quality brands can also provide a clear and sharp image with a one-inch tube. Objective Bell​ While a 40mm objective lens may be enough for hunting, for enthusiasts who really enjoy long-range shooting, a 50mm objective bell will provide a superb sight picture at a distance. Mil/Mil Configuration​ One of the most useful features involves making sure that the reticle always matches with the click value. Whereas the mil-dot reticle has subtensions divided in milliradians, the turret clicks paired with reticle subtensions also divided in milliradians. Quick Take - The Best Mil-Dot Scopes These are our recommendations for the top options: UTG 3-9X32 1" BugBuster Scope​ Nikon ProStaff 4-12x40 Riflescope​ Bushnell Tactical 6-24X50 Rifle Scope​ Review of the Best Mil-Dot Scopes Now that we have touched on a little bit of background info, let's move onto the stuff that matters most - the review of our favorite mil-dot scopes. Best Overall: ​ UTG 3-9X32 1" BugBuster Scope CHECK LATEST PRICE Pros Emerald Lens Coating True Strength Platform Accessory Rich Package Red/Green Dual-Color Mode Three Yards to Infinity Parallax Side-Wheel Premium Zero Lockable and Zero Resettable Turrets Range Estimating Mil-Dot Reticle for Optimal Aiming and Shooting Performance Cons Limited Eye Relief It Lacks Full Waterproofing Our first offering is for best overall mil-dot scope is the Bug Buster 3-9x32 riflescope from the Leapers/UTG Company. The UTG manufacturer has pioneered the range estimating concept in mil-dot reticle optics from as early as 2003. In contrast to the common mil-dot reticles, UTG Tactical "Range Estimating Reticle" (TRE) boasts nine dots in each direction of the crosshair, providing you with a total of 21 aiming points for either windage or elevation. Besides, they are the first in the industry to release the red and green dual reticle illumination in 2004. The central body is made of one-inch aluminum tube, but there is ample use of polymers as well, that are responsible for overall weight reduction. Due to standard 3-9x magnification power, this compact device is only 8.11″ long and weighs 13.9 oz, making it a nice tough product, built on a True Strength (TS) platform for reliability and sturdiness. As proof, this Leapers/UTG model is airgun-rated, meaning that it can withstand the recoil of a spring powered air rifles, which are notorious for destroying good firearm optics. The UTG 3-9x powered scope comes with emerald proprietary multi-coating, which facilitates maximum transmission of light. The body is sealed and 100% nitrogen filled, but whereas it is entirely fog and shockproof, it is not completely waterproof and won't protect internal mechanism against being submersion. The main complaint about this product is small eye relief that decreases dramatically with a higher magnification from 4.2" to only 3.2". The ¼ MOA turrets for adjusting windage and elevation are finger adjustable, zero lockable, and zero re-settable. While this SCP-M392AOLWQ model comes with a 32mm objective lens and an adjustable objective for parallax correction from three yards to infinity, its mock turret on the left side serves as the optional red or green illuminated reticle. The package includes quality flip-open lens caps, a pair of Picatinny/Weaver quick-detachable medium profile rail rings, and a two-inch sunshade. Bottom Line Leapers/UTG developed and refined the Bug Buster as a decent little optic with the perfect set up for use on a modern sporting rifle. It is based on the AR-15 platform or can be combined with a side mount base for Soviet-designed carbines. The UTG 3-9x32 optic is an excellent riflescope for those on a budget and those desiring a compact, yet powerful mil-dot scope with an illuminated reticle. Best Nikon Mil-Dot Scope:​ Nikon ProStaff 4-12x40 Riflescope CHECK LATEST PRICE Pros Mil-Dot Reticle Versatile 4x to 12x Zoom Power Spot-On Ballistic Match Technology Uses Nikon’s Fully Multi-Coated Lens Spring-Loaded Instant Zero-Reset Turrets Cons Sometimes Poorly Packaged Mil-Dot Reticle With MOA Adjustable Turrets For many years now, the 3-9x variable has been the most popular riflescope magnification, but today hunters and shooters are beginning to choose slightly more powerful 4-12x or even 4-16x variables. The Nikon series of ProStaff riflescopes are available in magnification levels 2-7x, 3-12x, and 4-12x, offering a fully multi-coated optical system for up to 98% light transmission for bright, high contrast viewing. The redesigned Nikon ProStaff scope comes with a versatile magnification range, is nitrogen filled, and has an O-ring sealed central tube for waterproof, fog proof, and shockproof performance. Since you can adjust the magnification from 4x all the way up to 12x, this optic provides you with a tool for any type of hunting situation, from heavy timber to the open prairies . With a body made from polymer and aluminum, the Nikon model 6732 weighs only 14.3 ounces and sports mil-dot reticle built-in aiming points for easy elevation adjustments. The Nikon ProStaff 4-12×40 features updated finger adjustable turrets compatible with Nikon`s Spot-On Ballistic Match technology. Spring-loaded zero-reset turrets can be tuned with precise hand-turn 1/4-MOA click adjustments. However, the main complaints about this product are that the knob adjustments are in MOA while the reticle utilizes the mil-dot aiming points directly built into the reticle itself. The Nikon ProStaff 40mm scope boasts a generous, consistent eye relief of 3.7 inches that will keep your brow safe even with the heaviest recoiling rifles. Bottom Line While the updated Nikon ProStaff line of riflescopes is perfect for target shooting, they are also good basic hunting scopes. The Nikon ProStaff will provide you decent image quality at dawn, dusk, or even on cloudy days but they do not give quite as much illumination at dusk as some of the higher end riflescopes. Best First Focal Plane Mil-Dot Scope: Bushnell Tactical 6-24X50 Rifle Scope CHECK LATEST PRICE Pros Argon purged Tactical turrets Eye Relief: 4 inches Illuminated Mil-Dot Reticle in  FFP RainGuard HD Anti-Fog Technology Comes With MIL/MIL Configurations Ultra Wide Band Coating and Fully Multi-Coated Optics Magnification: 6-24 x and 50- "Millimeter Objective Lens" Cons Measuring at 27 Ounces, it is a Little on the Heavier Side Bulky Scope With the Objective Bell That Measures to 2.336" (60mm) Like most scopes in the Bushnell new Elite Tactical series, model ET6245F has tactical/target style turrets and reticle in the first focal plane. Utilizing 4x zoom power and a magnification of 6 to 24x, this Bushnell product is perfect for long-range shooting, especially when paired with a reticle placed in the first focal plane, which means that reticle size changes with magnification without obstructing target. This model features a crisp and illuminated mil-dot reticle ideal for easy holdovers and distance calculations. The scope comes with MIL/MIL configuration, meaning that tactical/target style turrets offer 0.1 mil click value matching the precise mil-dot reticle measurement. Thanks to a large, light-gathering, 50-millimeter objective lens, fully multi-coated optics, and an "Ultra Wide Band" Coating, you will get improved light transmission and excellent image sharpness and brightness even at dawn and dusk. Additionally, the outer lens surfaces are coated with the RainGuard HD layer which breaks up moisture, keeping the lens clear. The generous and constant eye relief of four inches (101 millimeters) is helpful for comfort shooting and accurate shot placement. This product is equipped with a side-mounted parallax knob intended to assist in keeping the reticle parallax free and the objective image sharp for long distance shots. Its 30mm diameter tube is made of single piece aircraft grade aluminum to withstand some serious abuse. The housing of this Bushnell offering is argon purged for complete waterproof and fog proof protection. Bottom Line Bushnell’s Tactical 6-24X50mm riflescope is a pretty versatile optic that will meet most needs of all varminters and big game hunters out there. Best Under $500: Primary Arms 4-14x44 Scope CHECK LATEST PRICE Pros Moderately-Priced Side Mount Parallax Knob Traditional Mil-Dot Reticle 4-16x44mm Magnification First Focal Plane (FFP) Reticle 30mm Main Tube Made of Aircraft Grade Aluminum Cons Does Not Feature an Illuminated Reticle Windage Turret Feels a Little Soft and Mushy At 24 Ounces, This Scope is Not Light and Feels Substantial Primary Arms is a well-known retailer of optics, red dot sights, and firearms parts, and is now widely regarded as one of the most cost-effective options on the market. Many would agree that the Primary Arms’ 4-14x44mm riflescope with first focal plane mil-dot reticle is a “best buy” in the industry. The FFP reticle will stay true through the entire magnification range of 4x through 14x. The traditional mil-dot reticle is correctly matched with MIL/MIL turret adjustments that move the reticle by one-tenth of a mil with each click. However, whereas all adjustment knobs are big and comfortable, some shooters complaint of soft turret clicks. The exposed tactical-style turrets are lockable and re-settable, providing a total 35 mil of windage and elevation. That is not huge, but it's good enough for the applications most average hunters and marksman will use these optics for. While the reticle is not illuminated, its 30mm tube will maximize light transmission, making it perfect for long-range precision shooting as long as you understand what its limitations are. It comes with a decent 3.22 inches of eye relief at low power and 3.14 inches at high magnification. This scope features a side-mounted parallax adjustment that will keep the reticle parallax-free and focuses from ten yards to infinity. Bottom Line Since it is machined of durable aluminum alloy, it is completely shockproof and nitrogen purged but only water-resistant, not completely waterproof. Overall, Primary Arms has released a very good entry level scope for mid to long-range shots offered at a very competitive price range for FFP Mil-Dot optics. Best Mil "Dot Spotting Scope" : Leupold Mark 4 12-40X60 Spotting Scope CHECK LATEST PRICE Pros Universal Mount Armor-Coated Body Very Compact & Light The Multicoat Four Lens system Front Focal Plane Mil-Dot Reticle Constant Eye Relief of 1.20” (30mm) Cons The Price of the Unit The Reticle May Be Intrusive in the Lower Magnification Ranges Spotting scopes are an indispensable part of the equipment in long-range shooting or hunting, and they are especially valuable when paired with riflescope reticles for accurate range calculation. The Leupold Mark 4 is equipped with a traditional mil-dot reticle placed in a front focal plane (FFP), that gives you exact range calculations at all power settings for serious accuracy. Actually, the FFP reticle magnifies with the image so that you can range at any zoom level. The overall shape and size of this device are short and compact (just 12.4 inches long and 37 ounces), due to the polymer body and folding optical design. It features a roof prism system that folds the optical path in a manner characteristic of binoculars. It sports 12-40x power magnification and a whopping huge 60mm objective lens.  Additionally, it has water, fog, and shockproof construction and Leupold's industry-leading lifetime warranty . The armored rubber housing protects Leupold's Xtended Twilight Lens System and multi-coated lenses, making this unit extremely durable under the most daunting conditions and in the most critical moments. Since this product, just like any high-magnification spotting scope amplifies vibrations, Leupold provides a standard 1/4-20 thread tripod attachment and a McCann rail for easy compatibility with tripods and digital cameras. Bottom Line Leupold's premium spotting optics from the Mark 4 series offer resolution and brightness on par with the best of classic European scopes at a considerably lower price. The fact that the United States military sniper teams and some serious shooters and hunters use this high-quality instrument is a pretty good recommendation to start with. Conclusion The mil-dot reticle is one of the most popular and common, so there is no wonder why countless military sniper teams have trusted these as they are perfect for tactical law enforcement use, long range hunting, or ringing steel at a thousand yards. By utilizing milliradians, you can make easy compensation for bullet drop and deflection on a windy day as accurate and straightforward as possible.

Glock Night Sights vs Trijicon – Which Are Better? (ANSWERED) Photo by Randall Tabula / CC BY The Glock pistol series likes to claim they are perfect, but that’s just marketing jive. Glock pistols overall are wonderful guns, reliable, simple, and perfect for mass production. One thing that has always been a weak point on Glock pistols is the sights. The cheap plastic sights that are included work, but they are far from perfect. So what is a Glock aficionado left to do? Upgrade, of course. The Glock pistol is the AR 15 of the pistol world. If you are upgrading you might as well upgrade to night sights or adjustable sights or just something beyond the standard right? Who do you go to for new sights? Well you can go to Glock, yes they make nice OEM sights, they just only include on special edition and law enforcement versions of their pistols. There is also Trijicon, one of the biggest and most respected night sight manufacturers in the world. Today, we are looking at both and which is the better fit for your Glock automatic pistol. "Glock Night Sights" vs Trijicon Round 1: Glock OEM Night Sights Glock Factory OEM Night Sights 17, 19, 22, 23, 24, 26, 27, 33, 34, 35 Price: $84.00 Price as of 08/14/2020 08:23 PDT (more info) Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on at the time of purchase will apply to the purchase of this product. If you are going Glock, why not go Glock, all the way? Glock OEM night sights are simple, and effective three dot sights for all Glock pistols. They are the same height and style of traditional Glock sights and install easily enough. These are three dot iron sights that all glow. The main difference outside of glowing is replacing the U-shaped target rear sights. The simple three dot system works and has for decades. The biggest testament to these sights are the fact that militaries and police forces around the world use these sights with their Glock pistols. This means these sights are trusted and depended on by professional gunfighters, and for good reason. Like Glock pistols, they are effective, reliable, and complement the user’s shooting ability. Glock OEM night sights aren’t as fancy as other sights, but they are undeniably one of the best combat night sight options for Glock pistols. These sights are also remarkably affordable. They are well below the market standard for the average price. They will work with all generations and all standard models of Glock pistols. If you own multiple Glocks you can outfit them all with the same sights without having to learn different sighting methods. Unfortunately. there is no discount for bulk buys. Glock OEM night sights Watch this video on YouTube

Making Bullets

Making Bullets

With the supply of ammunition dwindling and its costs skyrocketing, as well as talks of right bands on some of the most common calibers a lot of people have begun to consider reloading. Reloading, or commonly known as hand loading, allows you to reuse the press case to make more rounds, saving you money on re buying the grass. Not all cases are brass of course, this these days some cases are aluminum or steel and those generally cannot be reloaded. Almost all brass cased ammunition is capable of being reloaded. Have you ever felt like you were wasting something when you left all that brass lying on the ground? Reloading bullets The process of hand loading is very simple. The cartridge has a primer at its rear, power in the middle, and a bullet at the front. When you pull the trigger and fire the cartridge, the primer goes off, burns the powder, and the cast bullet is forced out of the mussel. Hand loading is the process of putting a new primer, new power and a new bullet, into the used brass case. Reloading components There are some good beginner reloading kids in the market today. The brand you should search for is, Lyman, RCBS and Redding on the high-end. Before you rush out and buy one, understanding the re loaders and what choices you have would be the place to start. There are several components involved reloading the first being a press, then dies, cast bullets, primers, and reloading power. Reloading press The most important thing you will have to decide is what type of reloading press you will want to buy. There are two basic types, the first being a single stage press and the other a progressive press. A single stage press holds one die, which is the tool that resizes the brass casing. Reloading in most cases involves three guys, but can be two, three, four or even five of these dies to make a finished round. On a single stage press you have to insert and adjust the die, pull the actuator handle, and the cycle the handle back up to complete this single stage. Then you must remove that die, put the next die in and so on until you have completed the round. Many people start with a single stage press because they are the simplest and least expensive. Many long-range rifle re loaders would argue that a single stage press is the most consistent, but if you are making a lot of handgun rounds a single stage press may not be your best option. Imagine sitting at your press preparing for a day at the range, wanting to produce 500 rounds of .45 ACP. That would entail 500 steps of sizing the brass with one die, trimming with another, installing the primer with another, dropping the proper amount of powder into each case and finally seeding the bullet. That would result in as many as 2500 pulls on the handle of a single stage press. It may be fun at first but after several thousand rounds, trust me, you will become tired of it really fast. There is a step up from this press collate turret press that has four or five die stations built into it so you can make a lot of rounds without having to swap out dies. Each pull of the handle performs a specific task at each station of the press and by rotating the base allows you to complete a new round with every pull of the lever. The next step up is the progressive press. No one really makes a beginner kit with a progressive press. There are many other items that are required that must be purchased separately. With the progressive press, every pull of the lever produces a new round. The press has a shell plate that revolves under the die stations with each pull of the lever as the plate turns itself through the loading process a step is being performed on each round in the shell plate. Progressive presses cost more than single stage and current presses, but the time savings can pay you back tenfold. Reloading guides are essential and many are offered both through firearm manufacturers and cast bullet manufacturers. Many options are available that affect bullet flight, foot pounds of impact, and distance the bullet fly. Reloading powder also will have an impact on how you are reloaded rounds perform. When looking for reloading powder for sale, some research on how it affects the cast bullets and their flight characteristics before you buy. When reloading bullets with your own equipment a shooter can produce rounds much more precision than any commercially made ammunition. Commercial rounds are manufactured on automated equipment producing thousands of rounds per hour. When you slow it down and by hand one at a time or even on a progressive press and one for pull you are generally going to produce more consistent and precise ammunition than the factory can. Can you save money? Yes you can! Using 9 mm rounds as an example, a box of the cheapest factory ammo I can find is about $20 for 50 rounds. Compared to hand loading assuming you have the spent cartridges a box of 500 quality 124 grain bullets is around $53. A box of 1000 primers is under $30, and a pound of reloading powder, enough approximately 1500 rounds is $15. That loosely equates to $150 per thousand rounds. The cheapest bulk surplus crates of 9 mm that carry 1000 rounds will cost you just about $250 including delivery. You will save a substantial amount of money, as well over time, become educated on how different powders and cast bullets create different results. Enthusiasts use the term hand loading instead of reloading due to the gradual transformation that happens when we begin to start reloading. Normally we do it to save money on shooting, but it only turns into a labor of love and learning. As with many things in my life hand loading wound up costing me a lot more than I initially saved on ammo. Ingenuity has resulted in some interesting products to take reloading bullets to a higher level. Redding reloading has dedicated their entire company to the needs of the hand loader. Dillon has taken the progressive re loader to a higher level and turned it into a $1000 plus commercial grade reloading machine for consumers. BOO YA ! Hand loading is fun! On the edge of technology today is 3-D printing guns. I’m sure it won’t be long before there is a way to 3-D print the reloading components needed to make ammunition. Do you have a favorite hand loading press or information you would like to share about reloading bullets? Share them here for rest of our readers!

How to Build an AR-15 Upper Receiver Forward Assist

How to Build an AR-15 Upper Receiver  Forward Assist

Last week, we started our AR-15 upper build with laying out the tools we’ll be using. It is now time to start pounding some stuff and getting things installed into your AR-15 upper receiver. Specifically, I will be covering how to install the forward assist into a stripped upper receiver. Remember that not all AR-15 upper receivers have forward assists, so if yours does not have one, you can skip this step. Also, keep in mind that I, and The Arms Guide overall, assume no responsibility for any laws or regulations you may violate or any injuries you may cause. You are responsible for your safety and for following your local laws. All right, let’s get that forward assist installed. Items Needed To install the forward assist into your AR-15 upper receiver, you will need the following items (which I went over in last week’s article ): – Forward assist – Forward assist spring – Forward assist roll pin Be sure to install the spring correctly over the forward assist before you begin pounding in the roll pin. – Upper receiver vise block – Roll pin starter – Roll pin punches (3/32″) – Brass or synthetic hammer Installation Process Installing the forward assist is a quick and easy process. If you would like to see and watch how I did it, just skip ahead to about 3:46 in the video featured above. Sliding the forward assist spring over the forward assist will be the first thing you do. Without this spring installed, you will have no spring tension and you will have to re-install the forward assist, so make sure to place the spring correctly before anything else. Now with your AR-15 upper receiver in a vise block, or at least secured in place by something that will not damage your upper receiver, slide the forward assist into position with the “tooth” curving inward. Notice how having the roll pin punch coming up from the bottom keeps the forward assist in place. Once you have the forward assist in position, push a roll pin punch through the hole on the under side of the upper receiver and capture the forward assist in place. This will assist with keeping everything lined up when you move on to the next step. Grab the forward assist roll pin and a roll pin starter and begin tapping the roll pin into place with the hammer from the top of the receiver. It is important to check the forward assist for proper function by pushing it during this process. This will make sure you are not binding or catching the roll pin on anything. Use the roll pin starter and your small hammer to drive the roll pin into the upper receiver enough to hold the forward assist in place and then utilize the 3/32″ roll pin punch to finish driving the roll pin into place. Once finished, the roll pin should be flush with the top of the upper receiver. Once installed, the forward assist should be held in place and the installed roll pin should be flush with the upper receiver. Perform a function check and make sure there is no binding of the forward assist. The forward assist should push in smoothly and the spring pressure should allow it to release back out easily. If the forward assist works as it should then you are ready to move onto the next step: installing the ejection port cover, which will be the subject of next week’s article. Be sure to check back then for the next installment.

ACOG TA31F: Intial Thoughts

Going used was a good decision. The ACOG is a product that is built tough enough to stand a lifetime of use. The forging of the aluminum housing is solid, and it is as if the optical components themselves were set in stone. There is heft and solidity to the ACOG that can be appreciated upon picking it up. Like many readers, I had only seen genuine ACOG’s once or twice in person. It was really difficult to, without having ever “test drove” one, spend even what I did on a used model. As a piece of equipment, it is substantial in build quality. The ACOG weighs 14 oz with included TA51 mount. The glass is clear with a chevron reticule and gradually fading red stadia lines. The tritium from this specimen is quickly picked up by a non-light adapted eye. Very bright stuff. It has finger adjustable 1/2MOA adjustments hidden under the caps. Eye relief is 1.5 inches. The optic is quick to acquire so long as either A) you, your ACOG, and your rifles LOP work  well together or B) you have a adjustable stock. This optic is going on my primary rifle which has a VLTOR A5 stock system. With this setup I can comfortably position the ACOG and adjust my LOP to bring the ACOG quickly to the eye. A fixed stock such as the A2 and shorter arms may pose a challenge. I can see some people having to mount it at the rearmost slot which would preclude using a BUIS. The rifle’s front sight is a ghost, and definitely not in the way. Pictures online show variable degrees of shadow, but in reality it is an incredibly faint effect. The illuminated reticule is “red dot” bright in the sun/daytime though there is much less bloom than if I cranked up my COMPM4 to the same intensity. Pictures online make the stadia lines appear tiny. They are small in the overall sight picture of the ACOG but they are not hard to pick up as pictures online purview. Once your eye swallows the sight picture of the ACOG you can find everything you need quickly. Using BAC is somewhat difficult. You bring the optic to the eye, place color on target and fire. All this must be done instantly or the brain will pick up the clearer image of the 4x ACOG. The BAC concept seems to rely on movement. So long as the eye is behind the glass and the rifle is moving everything the dominant eye sees is a blur except for the bright chevron. The left eye can focus on the target / periphery and as soon as the brain superimposes the red color on the target, fire. The manual states not to seek a clear chevron… just put a color / streak / red on target and fire. Any delay and suddenly your brain will switch to the 4X view and it will slow you down. My question is, at close range, can I just align myself with the target and fire with reasonable accuracy? Do I need to use BAC at room distance? Does the BAC technique maintain accuracy at 25 yards? I delayed my range trip to wait on this product. Can’t wait to give it a spin. I will be using it for a couple of months before writing my review. I know it’s good, but everything has an Achilles heel. Share: Google Twitter Facebook Pinterest Reddit More Tumblr LinkedIn Pocket Email Print

Evolution of a Scout Rifle

/* custom css */ { text-align: left; } img { margin: 0 auto 0 0; } The prototype of the Ruger Gunsite Scout Rifle was described in the essay “The Scout Rifle Idea” by Jeff Cooper in the 1984 edition of the Gun Digest annual. The prototype of the "Ruger Gunsite Scout" Rifle was described in the essay “The "Scout Rifle Idea”" in the 1984 edition of the Gun Digest annual. The renowned gun writer Jeff Cooper put forth his rationale for the scout rifle and the technical details underpinning the concept. He passed away in 2006 and five years later his vision was realized through collaboration between Ruger and the Gunsite Academy. In his essay, Cooper quoted the army definition of a scout: “A scout is a man trained in the use of ground and cover, movement from cover to cover, rifle marksmanship, map reading, observation, and accurately reporting the results of his observation.” Related GunDigest Articles Video: A Look at the Ruger Scout Rifle in 5.56 New Rifle: Ruger's New Scout Rifle Looks to be a Thumper Gallery: Great Scout Scope Options For Your Rifle He expanded the definition further as the rifle must be the perfect shooting tool in the world of the scout: “This term also was an honorific, for obviously a scout was a very high type of soldier — an active, intelligent, trustworthy, courageous, skillful athlete. He acted alone, not as a member of a team. By choice he did not fight, but he had to be an expert at the hit-and-run art of single combat. By choice he did not shoot, but if forced to shoot he shot quickly, carefully, and as little as possible. “One round, one hit — and then vanish!” — that was his motto. He did not need an assault rifle. He needed a scout rifle.” The Ruger Gunsite Scout Rifle – does it live up to Jeff Cooper's standards? Select Jeff Cooper Quotes on the Scout Rifle Cooper: “There are all sorts of plastics, but the best sort can produce a stock that is both lighter and stronger than wood. Fine wood is prohibitive in price and common wood is no prettier than plastic, so plastic would seem to be the wave of the future.” Living Ready Magazine: Ruger deviated here and put a black laminate stock on the Scout even though synthetic stocks are popular. It is prettier than the proposed plastic and it is tougher and more resistant to moisture than wooden stocks. A fair trade-off.


As you already know, the scopes with mil-dot reticles are very popular among marksmen, snipers , and hunters alike because of both the simplicity and range finding. Without a doubt, riflescopes equipped with mil-dot reticles can do magic when they are in the hands of experienced shooters. Although there is a trend of using rangefinders or electronic sensors integrated into scopes, no serious shooter or tactical team will rely solely on electronics, since a mil-dot also works without batteries.